Step 1:
Clean, dry, and degrease the repair area, removing any loose or protruding particles.
Clean, dry, and degrease the repair area, removing any loose or protruding particles.
Step 2:
Tint Rex-Lith wood using Colour Touch-Up and mix with the appropriate amount of hardener.
Tint Rex-Lith wood using Colour Touch-Up and mix with the appropriate amount of hardener.
Step 3:
Apply the mixture to the hinge cavity, shaping it with a tool if necessary.
Apply the mixture to the hinge cavity, shaping it with a tool if necessary.
Step 4:
Before the material hardens, carefully trim off rough excess with a chisel.
Before the material hardens, carefully trim off rough excess with a chisel.
Step 6:
Sand with sandpaper wrapped around the Cork Sanding Block to even out the surface. Remove dust.
Sand with sandpaper wrapped around the Cork Sanding Block to even out the surface. Remove dust.
Step 7:
Apply PF Covering Lacquer to match the color, misting from 30-40 cm. Repeat as needed.
Apply PF Covering Lacquer to match the color, misting from 30-40 cm. Repeat as needed.
Before
After
