Step 1:
Ensure the area to be repaired is clean, dry, and free of grease. Remove any loose or protruding particles if necessary.
Ensure the area to be repaired is clean, dry, and free of grease. Remove any loose or protruding particles if necessary.
Step 2:
Tint with the PREMIUM Edge Pen. Custom colours (S.A.) according to template or colour number of the profile manufacturer are available on request.
Tint with the PREMIUM Edge Pen. Custom colours (S.A.) according to template or colour number of the profile manufacturer are available on request.
Step 3:
Melt the appropriately coloured Hard Wax PLUS with the Gas Heating Iron, filling the scratch.
Custom colours (S.A.) of Hard Wax Plus according to template or colour number of the profile manufacturer are available on request.
Melt the appropriately coloured Hard Wax PLUS with the Gas Heating Iron, filling the scratch.
Custom colours (S.A.) of Hard Wax Plus according to template or colour number of the profile manufacturer are available on request.
Step 4:
Use the Special Filler Applicator to remove excess wax. Note: Use the sharp grooves for the surface and the rounded grooves for edges.
Use the Special Filler Applicator to remove excess wax. Note: Use the sharp grooves for the surface and the rounded grooves for edges.
Step 6:
Clean/degrease the surface with the Sanding Pad, “coarse”.
Clean/degrease the surface with the Sanding Pad, “coarse”.
Step 7:
Seal with Furniture Lacquer PLUS, misting from 30-40 cm.
Seal with Furniture Lacquer PLUS, misting from 30-40 cm.
Before
After
