Step 1:
Remove any slight excess or dirt. Rub multiple shades of Quick Filler (light/medium/dark) into the scratch, alternating perpendicular to the scratch to match the colour of the surface.
Remove any slight excess or dirt. Rub multiple shades of Quick Filler (light/medium/dark) into the scratch, alternating perpendicular to the scratch to match the colour of the surface.
Step 2:
Using the edge of the Special Fillers Applicator, rub the applied wax in small circular motions with gentle pressure. Shave off any excess wax with the pointed grooves of the Special Fillers Applicator.
Using the edge of the Special Fillers Applicator, rub the applied wax in small circular motions with gentle pressure. Shave off any excess wax with the pointed grooves of the Special Fillers Applicator.
Step 3:
Stretch the Cotton Cloth tightly and in a single layer over the Felt Pad, then moisten it with Liquid Sandpaper. Use light pressure in circular motions to remove any grease around the area.
Stretch the Cotton Cloth tightly and in a single layer over the Felt Pad, then moisten it with Liquid Sandpaper. Use light pressure in circular motions to remove any grease around the area.
Step 4:
Seal the filled area and adjust the gloss level using Special Repair Lacquer PLUS. Spray from a distance of 30-40 cm, applying a light coat without oversaturating.
Seal the filled area and adjust the gloss level using Special Repair Lacquer PLUS. Spray from a distance of 30-40 cm, applying a light coat without oversaturating.