Step 1:
Secure a Micro Sanding Cloth in 1800 or 2400 grit (based on the material) over the Sanding Cork Block with Felt Pad. Wet-sand the area until scratches disappear, using ample water. When sanding wet, make sure to always use sufficient abrasive.
Secure a Micro Sanding Cloth in 1800 or 2400 grit (based on the material) over the Sanding Cork Block with Felt Pad. Wet-sand the area until scratches disappear, using ample water. When sanding wet, make sure to always use sufficient abrasive.
Step 2:
Gradually move up to finer grits, from 2.400 to 12.000, ensuring each grit size is used sequentially for optimal results. Continue to wet-sand with sufficient water.
Gradually move up to finer grits, from 2.400 to 12.000, ensuring each grit size is used sequentially for optimal results. Continue to wet-sand with sufficient water.
Step 3:
Periodically wipe the area with the Special Cloth to check progress.
Periodically wipe the area with the Special Cloth to check progress.
Step 4:
Remove any remaining fine marks by polishing with the Felt Pad and Polishing Paste, “fine”. Use enough paste to prevent dryness, which can lead to uneven polishing.
Remove any remaining fine marks by polishing with the Felt Pad and Polishing Paste, “fine”. Use enough paste to prevent dryness, which can lead to uneven polishing.